Switching On/Off
Wise Time Lag
Overview
The Wise Time Lag is a din rail receiver that has three different functions. The functions are on/off switching, push-to-make switching and timelag switching. The timelag function can be set to work between 1 second and 9 hours. This is very popular when installing lighting for communal hall ways and stair cases. As the switches are all wireless they can be placed anywhere with minimal effort.
Up to 16 switches can be programmed to one pack. This enables you to fit timelag switches without any wiring.
It can be programmed in 3 different ways:
Option A - Single Button Switching ON/OFF
The circuit can be turned ON/OFF from a single button.
Option B - Two Button Switching ON/OFF
The circuit can be turned ON/OFF from two buttons, for independent ON and OFF.
Option C - Mode
Choose from push-to-make, ON/OFF or time delay.
Wise Controls Introduction Video
Specification
General |
Detection Range |
100m |
IP Rating |
IP20 - Protection against fingers or other object not greater than 80mm in length and 12mm in diameter. No special protection against the harmful entry of various forms of moisture (e.g. dripping, spraying, submersion, etc.) |
Dimensions |
Depth |
58mm |
Height |
90mm |
Width |
35mm |
Electrical |
Maximum Wattage |
3000W |
Minimum Wattage per Circuit |
1W |
Voltage |
240V |