Wireless Sharp Switches
Wise Sharp Switch
Overview
The 2 channel Sharp Switch can be used to control any of the receivers in the Wise Controls range. The function of the switch, and the button, depends upon the function of the wireless receiver it is programmed to. Therefore a single button can be used for a variety of functions including, but not restricted to; on/off, dimming or master off only.
Wise switches are surface mounted so can be positioned almost anywhere. They are battery powered and a CR2430 battery is included with each unit. The battery life lasts up to 5 years.
Wise Controls Introduction Video
Specification
| General |
| Colour |
Black |
| Construction |
Plastic |
| IP Rating |
IP20 - Protection against fingers or other object not greater than 80mm in length and 12mm in diameter. No special protection against the harmful entry of various forms of moisture (e.g. dripping, spraying, submersion, etc.) |
| Maximum Switches per Receiver |
16 |
| Operating Temperature |
-10°C ~ +55°C |
| Radio Frequency |
868.3 MHz |
| Receiver Range |
100m |
| Dimensions |
| Depth |
9mm |
| Height |
86mm |
| Width |
86mm |
| Electrical |
| Replacement Battery |
CR2430 |
| Voltage |
3V |