Wise PIR Radio Sensor Black 2 Channel

PIR Sensors Wireless
Wise PIR Radio Sensor

Wise PIR Radio Sensor
Colour: Black
Type: 2 Channel
Quicklink: Q10C0
£54.00 excl.VAT
Product Code: WISEPIR BLACK
Wise Controls Wireless LightingPIR Sensors Wireless
Wise PIR Hood Radio Sensor IP44 Black 2 Channel Wise PIR Hood Radio Sensor IP44 Black 2 Channel WISEPIR+HOOD BLK £63.00excl.VAT
Switching On/Off
Wise Switch Receiver 1 Channel 1000W Wise Switch Receiver 1 Channel 1000W WISEREC1CH £62.50excl.VAT
 

Overview

The Wise PIR Radio Sensor is a battery powered unit. You can place the sensor without the need to hard wire it. The sensor can be mounted on the ceiling or wall. This PIR is only suitable for indoor use, an IP rated version is available.

You can adjust the time delay, light level of operation and PIR range by using the simple dials at the bottom of the eye ball. The time delay can be adjusted between a minimum of 5 seconds and a maximum of 5 minutes. The light level will control when the PIR sensor works according to how much natural light there is. The PIR detection range can be changed from a minimum of 1 metre to a maximum of 12 metres.

The eyeball has the word "top" printed on it. Whichever way you fit the sensor the word "top" must be at the top. The sensor can only be programmed to one channel on the WiseDim box.

We strongly recommend not using more than 1 of the PIRs on a single circuit due to problems caused by battery life. It has a range of up to 100 metres from the receiver.

Wise Controls Introduction Video

Specification

General
Colour Black
IP Rating IP00 - No special protection against the harmful entry of various forms of moisture (e.g. dripping, spraying, submersion, etc.)
Dimensions
Depth 126mm
Height 115mm
Width 86mm