Wise Pack Switch Receiver 2 Channel 2 x 1000W

Switching On/Off
Wise Pack Switch Receiver

Wise Pack Switch Receiver
Type: 2 Channel
Maximum Wattage: 2 x 1000W
Quicklink: Q16E5
£90.00 excl.VAT
Product Code: WISEPACK/SWI REC
Wise Controls Wireless LightingWireless ID Switches
Wise ID Switch Primed White 2 Channel Wise ID Switch Primed White 2 Channel WISEIDDSW2 PW £66.20excl.VAT
Wise ID Switch Satin Stainless Steel 2 Channel Wise ID Switch Satin Stainless Steel 2 Channel WISEIDDSW2 SS £66.20excl.VAT
Wireless Intense Switches
Wise Switch 2 Channel Black 3V Wise Switch 2 Channel Black 3V WISE INTENSE2 BL £37.80excl.VAT
Wise Switch 2 Channel White 3V Wise Switch 2 Channel White 3V WISE INTENSE2 WH £37.80excl.VAT
Wireless Style Switches
Wise Style Switch 2 Channel White Wise Style Switch 2 Channel White WISEDSW2 WHITE £37.80excl.VAT
Wise Wi-Fi Interface
Wise Wi-Fi Smart Interface for iPhone/Android WiFi Black Wise Wi-Fi Smart Interface for iPhone/Android WiFi Black WISEWIFI DAISY £216.00excl.VAT
 

Overview

The Wise Pack Switch Receiver will control your lights, water features, electric shutters and gates etc. Once programmed, place the indoor wireless switch in a suitable location and the installation is complete. Enjoy switching your circuits from anywhere in your garden or home with the remote control.

The maximum load you can have on one circuit is 1000W, the total wattage of the WisePack Switch is 2000W. The two independent circuits have a 200 metre range from the wireless switch

Wise Switches / Remotes

1 Button
You can program any one button wise switch to turn the lights on and off. This can only work for one circuit though, meaning when both of the channels on the WisePack Switch are being used, a minimum of a 2 button Switch is required.

2 Button
When both of the channels on the WisePack Switch are being used, a 2 button switch can allow the user to use one button to operate circuit 1 and the other button to operate circuit 2. This will mean that the same button which is 'ON' will also be the 'OFF' button. When only 1 channel on the WisePack Switching is being used, a two button switch can be programmed to have an 'on' and an 'off' button.

4 Button
A 4 button switch allows the user to memorise channels in pairs. Meaning that a simple change in the programming will automatically make button 1 and 2 on the Wise Switch an 'on' and 'off' function button for circuit 1. The same programming technique for circuit 2 will make buttons 3 and 4 pair up.

If you have any questions on this product please visit www.wisecontrols.com or contact us at Mr Resistor.

Wise Controls Introduction Video

Specification

General
Detection Range 200m
IP Rating IP20 - Protection against fingers or other object not greater than 80mm in length and 12mm in diameter. No special protection against the harmful entry of various forms of moisture (e.g. dripping, spraying, submersion, etc.)
Dimensions
Depth 165mm
Height 35mm
Width 47mm
Electrical
Maximum Wattage 2000W (2 x 1000W)
Maximum Wattage per Circuit 1000W
Voltage 240V