Wise Chameleon Master 350mA 21W

Chameleon Colour Change RGB
Wise Chameleon Master

Wise Chameleon Master 350mA 21W Example Wise Chameleon Master 350mA 21W Example
Wise Chameleon Master
Type: 350mA
Maximum Wattage: 21W
Quicklink: Q16E9
£96.80 excl.VAT
Product Code: WISERGB 350MA M3
LED Power SuppliesSwitching
LED Driver (Constant Voltage) Silver 25W 24V Parallel LED Driver (Constant Voltage) Silver 25W 24V Parallel RS2524 £18.70excl.VAT
Wise Controls Wireless LightingChameleon Colour Change RGB
Wise Chameleon Slave 350mA 21W Wise Chameleon Slave 350mA 21W WISERGB 350MA SL £68.20excl.VAT
Wireless ID Switches
Wise ID Switch Primed White 7 Channel Wise ID Switch Primed White 7 Channel WISEIDDSW7 PW £70.47excl.VAT
Wise ID Switch Satin Stainless Steel 7 Channel Wise ID Switch Satin Stainless Steel 7 Channel WISEIDDSW7 SS £70.48excl.VAT
Wireless Intense Switches
Wise Switch 7 Channel White 3V Wise Switch 7 Channel White 3V WISE INTENSE7 WH £45.00excl.VAT
Wise Switch 7 Channel Black 3V Wise Switch 7 Channel Black 3V WISE INTENSE7 BL £45.00excl.VAT
Wireless Remotes
Wise Pod Remote 7 Channel White Wise Pod Remote 7 Channel White WISEPOD7 WHT £49.50excl.VAT
Wise Pod Remote 42 Channel White Wise Pod Remote 42 Channel White WISEPOD42 WHT £54.00excl.VAT
Wise Pod RGB USB Interface
Wise Pod RGB USB Interface + Software 7 Button White Wise Pod RGB USB Interface + Software 7 Button White WISEPOD7 *USB* £229.09excl.VAT
 

Overview

The Wise Chameleon Master receiver is a 350mA 21W LED colour change controller and LED dimmer. It is controlled by wireless switches or by a push-to-make switch. It can colour change and dim any 350mA RGB LEDs or single colour LEDs. It can be programmed in 6 different ways using our wireless switches:

  • Option A : Full Colour Change with a 7 button switch - Choose preset colours, dim colours and colour cycle.
  • Option B : Colour Stepping with a 1 button switch - Step through 8 preset colours.
  • Option C : Dim single colour LEDs with a 1 button switch - Dim LEDs without a minimum load.
  • Option D : Dim Warm White with RGB LEDs - Set RGB LEDs automatically to warm white for general use.
  • Option E : Switching ON only Programming - Allows you to switch ON the receiver.
  • Option F : Switching OFF only Programming - Allows you to switch OFF the receiver.

A receiver is not limited to one of the programming options. E.g. you can program a switch for full colour control, another switch for dimming and another switch for master ON/OFF.

Slave Chameleon
The Slave Chameleon is used when more load is required on the same circuit. Using the Slave keeps the colour cycle and dimming options synchronised.

Power Supply
The Wise Chameleon Master requires a 24V DC power supply. Choose the wattage of the power supply that matches your load. Each Wise Chameleon Slave requires a power supply.

Wireless Switches
The Wise Chameleon Master requires a wireless switch to operate. Choose a 7 button switch for full colour change or a 1 button switch for the other programming options.

Last Setting Memory
Built in memory will resume the previous setting prior to turn off.

Caution: The warm white produced by RGB products is not the same as the warm white produced by single coloured products. By mixing the colours to create warm white a hint of Red, Green, or Blue may appear.

Wise Controls Introduction Video

Specification

General
Construction Plastic
IP Rating IP20 - Protection against fingers or other object not greater than 80mm in length and 12mm in diameter. No special protection against the harmful entry of various forms of moisture (e.g. dripping, spraying, submersion, etc.)
Maximum Slave per Master Receiver Unlimited
Maximum Switches per Receiver 16
Minimum Spacing Between Receivers 200mm
Radio Frequency 868.3 MHz
Range for Metal Switch 50m Max Line Of Sight
Range for Plastic Switch 100m Max Line Of Sight
Dimensions
Height 35mm
Length 165mm
Width 47mm
Electrical
Amperage 350mA
Input Voltage 24V DC
Maximum Wattage 21W
Minimum Wattage 1W