Chameleon Colour Change RGB
Wise Chameleon Slave Tape30
January Sale - 15% Off Wise Controls
Overview
The Wise Chameleon Slave Tape30 is a 12V 90W / 24V 180W LED colour change controller and LED dimmer. It is used with any of the Wise Chameleon Master receivers. Different types of Wise Chameleon Slave can be connected together.
The slave communicates with the master receiver via a data cable (40cm length). The Slave stays synchronised with the master receiver.
Power Supply
The Wise Chameleon Slave requires a 12V or 24V DC power supply. Choose the wattage of the power supply that matches your load.
Caution: The warm white produced by RGB products is not the same as the warm white produced by single coloured products. By mixing the colours to create warm white a hint of Red, Green, or Blue may appear.
Wise Controls Introduction Video
Specification
General |
Construction |
Plastic |
IP Rating |
IP20 - Protection against fingers or other object not greater than 80mm in length and 12mm in diameter. No special protection against the harmful entry of various forms of moisture (e.g. dripping, spraying, submersion, etc.) |
Maximum Slave per Master Receiver |
Unlimited |
Minimum Spacing Between Receivers |
5mm |
Dimensions |
Height |
35mm |
Length |
165mm |
Width |
47mm |
Electrical |
Input Voltage |
12V DC / 24V DC |
Maximum Wattage |
180W |
Minimum Wattage |
1W |
Output Voltage |
12V DC / 24V DC |