Wise Controls
Call 020 8874 2234
Wise Tunable White Receiver (Warm/Cool) 12-24V 200W

Wise Tunable White Receiver (Warm/Cool) 12-24V 200W

Product code WISEDYN STRIP M4
£90.13 ex. VAT
The Wise Scene Dynamic White Receiver is controlled by wireless switches or by a push-to-make switch. Designed to work in conjunction with the dynamic white LED tape, Lamps and strips it has 2 outputs for the connection of cool white LEDs and a warm white LEDs, allowing you to adjust the temperature of the colour, mixing the output from cool white to warm white. Receiver also has On/Off and dimmer function with built in memory to remember previous setting when switched on.

This product will connect to the WIZEWHEEL7 DYN

Wise Controls Introduction Video

  • Wireless platform — no rewiring between switches and receivers
  • Programmed by button-press — no software, hub or app required to set up
  • Free installer training and UK technical support from the Wandsworth team
Find a stockist Enquire about this product
Free training available for installers — book a slot.

Specifications

Maximum Scenes per Receiver 4
Maximum Switches per Receiver 42
Radio Frequency 868.3 MHz
Range for Metal Switch 50m Max Line Of Sight
Range for Plastic Switch 100m Max Line Of Sight
Dimensions
Width 47mm
Electrical
Input Voltage 12-24V
Maximum Wattage 200W
Output Voltage 12-24V
General
Construction Plastic
IP Rating IP20

Downloads

Common questions

Do I need Wi-Fi for this to work?
No. The Wise platform runs on radio frequency (RF), independent of your home Wi-Fi or broadband. The system continues to function during internet outages.
Is special programming software required?
No software, hub or laptop is needed for standard setup. Pairing is done by pressing buttons on the receiver and transmitter in sequence — any qualified installer or competent homeowner can do it.
Can I add this to an existing Wise installation?
Yes. Any new Wise receiver or transmitter pairs directly with existing kit. There's no version lock — Wise Box receivers, Scene controllers and Fusion dimmers all live on the same RF platform regardless of generation.
Does it need a qualified electrician to install?
Wireless transmitters (keypads, remotes, PIRs) can be installed by a competent person without mains work. Receivers and dimmers wire into the mains supply and must be installed by a qualified electrician. Free training is available — see our training page.
Where can I buy it?
Wise Controls equipment is sold through authorised electrical wholesalers nationwide — see our stockists page for the full list, or contact us for the closest distributor to your project.

Complete the look

Other products in the Dimming & Scene Setting range that pair with this one.