Wise Controls
Call 020 8874 2234
Wise Mio Keyfob Remote 2 Channel Black Wise Mio Keyfob Remote 2 Channel Black

Wise Mio Keyfob Remote 2 Channel Black

Product code WISEMIO2 BLACK
£36.80 ex. VAT
The Wise Mio Keyfob Remote operate in the same way as the wall mountable wireless WiseStyle Switches but in a hand held key ring attachable form.

The 2 and 4 button remotes can be programmed to any of the channels on the Wise receivers, with the possibility of adding up to 32 switches. This means there is no need for two way wiring as you can just add another radio switch and place it where you like.

You could keep one with your car keys and as you drive up to your house, you can switch on your garden lights and hall lights.

You can program the 1 button remote to switch more than one Wise receiver. So for example, if you had three receivers it is possible with the 1 button switch to control a circuit from each of the receivers. There is no limit on how many Wise receivers are programmed to the same remote.

The battery life lasts up to 2 years.

  • Product Code Keyfob 2 Channel: TVMIO868P02

Wise Controls Introduction Video

  • Wireless platform — no rewiring between switches and receivers
  • Programmed by button-press — no software, hub or app required to set up
  • Free installer training and UK technical support from the Wandsworth team
Find a stockist Enquire about this product
Free training available for installers — book a slot.

Specifications

Operating Temperature -10°C ~ +55°C
Radio Frequency 868.3 MHz
Dimensions
Depth 10mm
Height 60mm
Width 30mm
Electrical
Power Supply 3V Lithium Battery CR2032
Voltage 3V
General
Colour Black
Construction Aluminium / Plastic
IP Rating IP20

Downloads

Manuals & instructions

Common questions

Do I need Wi-Fi for this to work?
No. The Wise platform runs on radio frequency (RF), independent of your home Wi-Fi or broadband. The system continues to function during internet outages.
Is special programming software required?
No software, hub or laptop is needed for standard setup. Pairing is done by pressing buttons on the receiver and transmitter in sequence — any qualified installer or competent homeowner can do it.
Can I add this to an existing Wise installation?
Yes. Any new Wise receiver or transmitter pairs directly with existing kit. There's no version lock — Wise Box receivers, Scene controllers and Fusion dimmers all live on the same RF platform regardless of generation.
Does it need a qualified electrician to install?
Wireless transmitters (keypads, remotes, PIRs) can be installed by a competent person without mains work. Receivers and dimmers wire into the mains supply and must be installed by a qualified electrician. Free training is available — see our training page.
Where can I buy it?
Wise Controls equipment is sold through authorised electrical wholesalers nationwide — see our stockists page for the full list, or contact us for the closest distributor to your project.

Complete the look

Other products in the Dimming & Scene Setting range that pair with this one.