Wise Controls
Call 020 8874 2234
Wise ID Switch Primed White 42 Channel Wise ID Switch Primed White 42 Channel Wise ID Switch Primed White 42 Channel Wise ID Switch Primed White 42 Channel Wise ID Switch Primed White 42 Channel Wise ID Switch Primed White 42 Channel Wise ID Switch Primed White 42 Channel Wise ID Switch Primed White 42 Channel Wise ID Switch Primed White 42 Channel Wise ID Switch Primed White 42 Channel Wise ID Switch Primed White 42 Channel

Wise ID Switch Primed White 42 Channel

Product code WISEIDDSW42 PW
£122.44 ex. VAT
The 42 channel Wise ID Switches can be programmed to any of the channels on the Wise receivers. There is no need for two way wiring as you can add another radio switch and place it where you like. You can program these switches to switch more than one Wise receiver.

The 42 channel switch can be used as a scene setting switch, a colour changing control switch, or as a regular switch able to control up to 42 independent circuits. This switch is compatible with every receiver within the Wise Controls range.

This switch incorporates six different menus for navigation, with each menu controlling seven separate circuits (6x7).

The battery life lasts up to five years.

Wise Controls Introduction Video

  • Wireless platform — no rewiring between switches and receivers
  • Programmed by button-press — no software, hub or app required to set up
  • Free installer training and UK technical support from the Wandsworth team
Find a stockist Enquire about this product
Free training available for installers — book a slot.

Specifications

Operating Temperature -10°C ~ +55°C
Radio Frequency 868.3 MHz
Dimensions
Height 86mm
Plate Depth 1.5mm
Width 86mm
Electrical
Replacement Battery CR2430
Voltage 3V
General
Colour Primed White
Construction Steel
IP Rating IP20

Downloads

Common questions

Do I need Wi-Fi for this to work?
No. The Wise platform runs on radio frequency (RF), independent of your home Wi-Fi or broadband. The system continues to function during internet outages.
Is special programming software required?
No software, hub or laptop is needed for standard setup. Pairing is done by pressing buttons on the receiver and transmitter in sequence — any qualified installer or competent homeowner can do it.
Can I add this to an existing Wise installation?
Yes. Any new Wise receiver or transmitter pairs directly with existing kit. There's no version lock — Wise Box receivers, Scene controllers and Fusion dimmers all live on the same RF platform regardless of generation.
Does it need a qualified electrician to install?
Wireless transmitters (keypads, remotes, PIRs) can be installed by a competent person without mains work. Receivers and dimmers wire into the mains supply and must be installed by a qualified electrician. Free training is available — see our training page.
Where can I buy it?
Wise Controls equipment is sold through authorised electrical wholesalers nationwide — see our stockists page for the full list, or contact us for the closest distributor to your project.

Complete the look

Other products in the Dimming & Scene Setting range that pair with this one.