Wise Style Time Clock 2 Channel White

Product code WISETC4 WHITE
£69.53 ex. VAT
The Wise Style Time Clock switch can be programmed to any of our Wise receivers, a maximum of two receivers per switch. Examples include the Wise Box, Wise Dim Box, Wise Pack Switch Receiver, Wise Switch receiver and any Wise Scene Receiver (if a separate master on and master off is programmed). This product is ideal for use in scenarios where lighting is required to turn on regularly without any user input once set up. A maximum of six commands a day, 7 days a week can be programmed. Alternatively, you can use the built-in functions to control your lighting, such as automatic dusk to dawn mode. Please refer to the instructions located on the downloads tab for more information.

The battery life lasts up to 2 years.

Key Benefits

  • The timeclock can control two circuits manually as well as control them automatically once timer functions are set up
  • Can set automatic ON when the sun sets and OFF for a specific time e.g. 11pm
  • It allows the possibility of programming 6 commands per day, 7 days a week
  • Commands can be automatically programmed for dusk and dawn, every day of the week and random start
  • Radio switches require no wiring
  • No back box required

Wise Controls Introduction Video

Wise Timeclock Programming Video

  • Wireless platform — no rewiring between switches and receivers
  • Programmed by button-press — no software, hub or app required to set up
  • Free installer training and UK technical support from the Wandsworth team
Free training available for installers — book a slot.

Specifications

Operating Temperature -10°C ~ +55°C
Radio Frequency 868.3 MHz
Dimensions
Depth 13mm
Height 86mm
Width 86mm
Electrical
Power Supply 3V Lithium Battery CR2032
General
Colour White

Common questions

Do I need Wi-Fi for this to work?
No. The Wise platform runs on radio frequency (RF), independent of your home Wi-Fi or broadband. The system continues to function during internet outages.
Is special programming software required?
No software, hub or laptop is needed for standard setup. Pairing is done by pressing buttons on the receiver and transmitter in sequence — any qualified installer or competent homeowner can do it.
Can I add this to an existing Wise installation?
Yes. Any new Wise receiver or transmitter pairs directly with existing kit. There's no version lock — Wise Box receivers, Scene controllers and Fusion dimmers all live on the same RF platform regardless of generation.
Does it need a qualified electrician to install?
Wireless transmitters (keypads, remotes, PIRs) can be installed by a competent person without mains work. Receivers and dimmers wire into the mains supply and must be installed by a qualified electrician. Free training is available — see our training page.
Where can I buy it?
Wise Controls equipment is sold through authorised electrical wholesalers nationwide — see our stockists page for the full list, or contact us for the closest distributor to your project.