Wise Converter 6-30V 350mA
Product code WISE CONVERTER 3
£7.73
ex. VAT
The Wise Converter 3 is a power supply that is used to drive 350mA LEDs, but only requires an input of anything between 6 to 30V. This makes it ideal for use on boats, cars, caravans, or motorbikes where the supply is limited to low votlage, or for powering direct from a battery.
Any wattage 350mA LED can be used, but cannot exceed a maximum of 8 units wired in series, or 7W.
This product is rated IP68 so is suitable for use in wet and humid environments. Includes thermic and short circuit protection.
- Wireless platform — no rewiring between switches and receivers
- Programmed by button-press — no software, hub or app required to set up
- Free installer training and UK technical support from the Wandsworth team
Free training available for installers — book a slot.
Specifications
| Dimensions | |
|---|---|
| Height | 22mm |
| Length | 21mm |
| Width | 41mm |
| Electrical | |
| Amperage | 350mA |
| Maximum Wattage | 7W |
| General | |
| Colour | Black |
| Construction | Plastic |
| Dimmable | No |
Downloads
Spec sheets
Catalogues
Common questions
Do I need Wi-Fi for this to work?
No. The Wise platform runs on radio frequency (RF), independent of your home Wi-Fi or broadband. The system continues to function during internet outages.
Is special programming software required?
No software, hub or laptop is needed for standard setup. Pairing is done by pressing buttons on the receiver and transmitter in sequence — any qualified installer or competent homeowner can do it.
Can I add this to an existing Wise installation?
Yes. Any new Wise receiver or transmitter pairs directly with existing kit. There's no version lock — Wise Box receivers, Scene controllers and Fusion dimmers all live on the same RF platform regardless of generation.
Does it need a qualified electrician to install?
Wireless transmitters (keypads, remotes, PIRs) can be installed by a competent person without mains work. Receivers and dimmers wire into the mains supply and must be installed by a qualified electrician. Free training is available — see our training page.
Where can I buy it?
Wise Controls equipment is sold through authorised electrical wholesalers nationwide — see our stockists page for the full list, or contact us for the closest distributor to your project.
Complete the look
Other products in the Accessories range that pair with this one.
