Wise Controls
Call 020 8874 2234
Wise Skin Switch 2 Channel White

Wise Skin Switch 2 Channel White

Product code WISERSW2 WHITE
£36.05 ex. VAT
The 1, 2 and 4 channel Wise Skin Switches can be programmed to any of the channels on the Wise receivers. You can add up to 32 switches to the Wise receivers. This means there is no need for two way wiring as you can add another radio switch and place it where you like. You can program these switches to switch more than one Wise receiver.

The battery life lasts up to two years.

Key Benefits

  • Turn all circuits off
  • Turn the first 2 circuits on
  • Turn all 4 circuits on
  • Radio switches require no wiring
  • No back box required

Wise Controls Introduction Video

  • Wireless platform — no rewiring between switches and receivers
  • Programmed by button-press — no software, hub or app required to set up
  • Free installer training and UK technical support from the Wandsworth team
Find a stockist Enquire about this product
Free training available for installers — book a slot.

Specifications

Operating Temperature -10°C ~ +55°C
Radio Frequency 868.3 MHz
Dimensions
Depth 10mm
Height 80mm
Width 80mm
Electrical
Power Supply 3V Lithium Battery CR2430
General
Colour White

Downloads

Common questions

Do I need Wi-Fi for this to work?
No. The Wise platform runs on radio frequency (RF), independent of your home Wi-Fi or broadband. The system continues to function during internet outages.
Is special programming software required?
No software, hub or laptop is needed for standard setup. Pairing is done by pressing buttons on the receiver and transmitter in sequence — any qualified installer or competent homeowner can do it.
Can I add this to an existing Wise installation?
Yes. Any new Wise receiver or transmitter pairs directly with existing kit. There's no version lock — Wise Box receivers, Scene controllers and Fusion dimmers all live on the same RF platform regardless of generation.
Does it need a qualified electrician to install?
Wireless transmitters (keypads, remotes, PIRs) can be installed by a competent person without mains work. Receivers and dimmers wire into the mains supply and must be installed by a qualified electrician. Free training is available — see our training page.
Where can I buy it?
Wise Controls equipment is sold through authorised electrical wholesalers nationwide — see our stockists page for the full list, or contact us for the closest distributor to your project.

Complete the look

Other products in the Dimming & Scene Setting range that pair with this one.