Wise Chameleon Slave Outdoor Box 350mA 21W
Product code WISERGB BOX21 SL
£142.55
ex. VAT
The Wise Chameleon Slave Outdoor Box is an IP54 rated wall mounted box specifically designed to allow outdoor wireless colour change lighting. The unit is designed to work in conjunction with a WISERGB BOX 42W and is used when an extra slave is required.
The box is small and discrete enough to be hidden away, while remaining durable enough to handle all forms of weather. The Wise Chameleon Outdoor Box contains a Wise Chameleon Slave which needs to be connected to the Slave in the master box using a data cable, and a 25W, 24VDC power supply. Glands situated at the bottom of the box stops moisture from entering.
The box is small and discrete enough to be hidden away, while remaining durable enough to handle all forms of weather. The Wise Chameleon Outdoor Box contains a Wise Chameleon Slave which needs to be connected to the Slave in the master box using a data cable, and a 25W, 24VDC power supply. Glands situated at the bottom of the box stops moisture from entering.
Caution: The warm white produced by RGB products is not the same as the warm white produced by single coloured products. By mixing the colours to create warm white a hint of Red, Green, or Blue may appear.
Wise Controls Introduction Video
- Wireless platform — no rewiring between switches and receivers
- Programmed by button-press — no software, hub or app required to set up
- Free installer training and UK technical support from the Wandsworth team
Free training available for installers — book a slot.
Specifications
| Range for Plastic Switch | 100m Max Line Of Sight |
| Dimensions | |
| Height | 225mm |
| Length | 76mm |
| Width | 150mm |
| Electrical | |
| Amperage | 350mA |
| Maximum Wattage | 21W |
| General | |
| Colour | Grey |
| Construction | Plastic |
| IP Rating | IP54 |
Downloads
Spec sheets
Manuals & instructions
Common questions
Do I need Wi-Fi for this to work?
No. The Wise platform runs on radio frequency (RF), independent of your home Wi-Fi or broadband. The system continues to function during internet outages.
Is special programming software required?
No software, hub or laptop is needed for standard setup. Pairing is done by pressing buttons on the receiver and transmitter in sequence — any qualified installer or competent homeowner can do it.
Can I add this to an existing Wise installation?
Yes. Any new Wise receiver or transmitter pairs directly with existing kit. There's no version lock — Wise Box receivers, Scene controllers and Fusion dimmers all live on the same RF platform regardless of generation.
Does it need a qualified electrician to install?
Wireless transmitters (keypads, remotes, PIRs) can be installed by a competent person without mains work. Receivers and dimmers wire into the mains supply and must be installed by a qualified electrician. Free training is available — see our training page.
Where can I buy it?
Wise Controls equipment is sold through authorised electrical wholesalers nationwide — see our stockists page for the full list, or contact us for the closest distributor to your project.