Wise ID Switch Satin Stainless Steel 7 Channel
Product code WISEIDDSW7 SS
£83.24
ex. VAT
The 1, 2 and 4 channel Wise ID Switches can be programmed to any of the channels on the Wise receivers. You can add up to 32 switches to the Wise receivers. This means there is no need for two way wiring as you can add another radio switch and place it where you like. You can program these switches to switch more than one Wise receiver.
The 7 channel switch can be used as a scene setting switch, a colour changing control switch, or as a regular switch able to control up to 7 independent circuits. This switch is compatible with every receiver within the Wise Controls range.
The battery life lasts up to five years.
Key Benefits
- Compatible with all receivers
- Recessed against the wall
- Radio switches require no wiring
Wise Controls Introduction Video
- Wireless platform — no rewiring between switches and receivers
- Programmed by button-press — no software, hub or app required to set up
- Free installer training and UK technical support from the Wandsworth team
Free training available for installers — book a slot.
Specifications
| Operating Temperature | -10°C ~ +55°C |
| Radio Frequency | 868.3 MHz |
| Dimensions | |
| Depth | 20mm |
| Height | 86mm |
| Plate Depth | 1.5mm |
| Width | 86mm |
| Electrical | |
| Replacement Battery | CR2430 |
| Voltage | 3V |
| General | |
| Colour | Stainless Steel |
| Construction | Steel |
| IP Rating | IP20 |
Downloads
Spec sheets
Catalogues
Common questions
Do I need Wi-Fi for this to work?
No. The Wise platform runs on radio frequency (RF), independent of your home Wi-Fi or broadband. The system continues to function during internet outages.
Is special programming software required?
No software, hub or laptop is needed for standard setup. Pairing is done by pressing buttons on the receiver and transmitter in sequence — any qualified installer or competent homeowner can do it.
Can I add this to an existing Wise installation?
Yes. Any new Wise receiver or transmitter pairs directly with existing kit. There's no version lock — Wise Box receivers, Scene controllers and Fusion dimmers all live on the same RF platform regardless of generation.
Does it need a qualified electrician to install?
Wireless transmitters (keypads, remotes, PIRs) can be installed by a competent person without mains work. Receivers and dimmers wire into the mains supply and must be installed by a qualified electrician. Free training is available — see our training page.
Where can I buy it?
Wise Controls equipment is sold through authorised electrical wholesalers nationwide — see our stockists page for the full list, or contact us for the closest distributor to your project.
Complete the look
Other products in the Dimming & Scene Setting range that pair with this one.
WISESCENE V4KITGWise Scene Box Kit includes Keypad and Key Fob 240V 4x500WWirelessScene SettingOutdoor£350.00 ex. VAT
WISESMOUS KITMOWise Scene Box, Keypad, Keyfob and Mouse Dimmer & Daylight Sensor Kit 240V 4x500WWirelessScene SettingOutdoor£422.10 ex. VAT
WISESCENE KITRSWise Scene Box Control 4 Keypad, Keyfob and RS232 Interface Kit 240V 4x500WWirelessScene SettingOutdoor£555.28 ex. VAT
WISESCENE V4RECGWise Scene Box Receiver 240V 4x500WWirelessScene SettingOutdoor£300.00 ex. VAT