Wise Controls
Call 020 8874 2234
Wise Wall Mounted Dusk to Dawn Switch & Daylight Sensor Dusk to Dawn White Wise Wall Mounted Dusk to Dawn Switch & Daylight Sensor Dusk to Dawn White

Wise Wall Mounted Dusk to Dawn Switch & Daylight Sensor Dusk to Dawn White

Product code WISE DUSK/DAWN
£64.89 ex. VAT
Wall-mounted radio transmitter with integrated light sensor with dusk/dawn function.

Automatic control of lights, loads and automation with dusk/dawn function.

The device transmits commands according to the measured light level to the associated receiver.

Can be used to control:

  • ON/OFF for any load (halogen, fluorescent or incandescent lighting included)
  • OPEN/CLOSE for rolling shutters, awnings and screens
  • ON/OFF of RGB scenes

Programmable operating times, from 2 to 8 hours, of the associated receiver.

Activation threshold can be configured from 10 to 150 lux.

Wise Controls Introduction Video

Wise Dusk to Dawn Switch & Daylight Sensor Programming

  • Wireless platform — no rewiring between switches and receivers
  • Programmed by button-press — no software, hub or app required to set up
  • Free installer training and UK technical support from the Wandsworth team
Find a stockist Enquire about this product
Free training available for installers — book a slot.

Specifications

Operating Temperature -10° +55°C
Radio Frequency 868.3 MHz
Dimensions
Depth 48mm
Height 80mm
Plate Depth 3mm
Width 37mm
General
Colour White
Construction Plastic
IP Rating IP54

Downloads

Common questions

Do I need Wi-Fi for this to work?
No. The Wise platform runs on radio frequency (RF), independent of your home Wi-Fi or broadband. The system continues to function during internet outages.
Is special programming software required?
No software, hub or laptop is needed for standard setup. Pairing is done by pressing buttons on the receiver and transmitter in sequence — any qualified installer or competent homeowner can do it.
Can I add this to an existing Wise installation?
Yes. Any new Wise receiver or transmitter pairs directly with existing kit. There's no version lock — Wise Box receivers, Scene controllers and Fusion dimmers all live on the same RF platform regardless of generation.
Does it need a qualified electrician to install?
Wireless transmitters (keypads, remotes, PIRs) can be installed by a competent person without mains work. Receivers and dimmers wire into the mains supply and must be installed by a qualified electrician. Free training is available — see our training page.
Where can I buy it?
Wise Controls equipment is sold through authorised electrical wholesalers nationwide — see our stockists page for the full list, or contact us for the closest distributor to your project.

Complete the look

Other products in the Sensors range that pair with this one.