Wired Ceiling flush mounted microwave presence detection switch kit 240V White 400W

The transmitter is small enough to be placed in many locations, for example, in the ceiling, in the wall either through it, behind a recessed light fitting or in a surfaced mounted fitting. The transmitter should be placed in a suitable insulated box.

It can be fitted into a small waterproof box to allowed it to be used outside for your garden lighting, garage doors and water features.

The transmitters are designed to be simple to install, easy to use and most importantly, reliable.

The Ceiling flush-mounted microwave presence detection switch is designed for the automatic switching of lighting, heating, and air conditioning loads. These neat and unobtrusive models are ideal for flush mounting through suspended or plasterboard ceilings. The sensor detects movement within its range of detection by emitting low-power microwave signals and measuring the reflections as the signal reflects off moving objects such as people moving through a room.

When movement is detected, the load switches on. If no more movement is detected within a certain time, the MWCEFL will switch the load off. This time lag (hold time) can also be set via the rotary switch. Upon detecting movement, if the ambient light is dark enough, MWCEFL will turn the load on. The ambient threshold can also be set by setting the rotary dial to the appropriate preset. If no more movement is detected within a pre-selected time, then MWCEFL will turn the load off.

Wise Controls Introduction Video